Vaporesso

Vaporesso offers a variety of vaping products at different price points. Here's a general idea of the price ranges for each category based on the sources and our conversation:

• Vape Kits: Vaporesso vape kits generally range from £12 to £35. 
• Pods: Vaporesso replacement pods usually cost between £4 and £11 for a pack. The price can vary depending on the pod's e-liquid capacity, coil type, and quantity per pack.
• Mods: Vaporesso mods can be found in the £30 to £40 range. These are typically box mods that offer high wattage output and advanced features like temperature control. Examples include the GEN MAX Box Mod and Armour S Box Mod.
• Tanks: Vaporesso vape tanks are generally priced around £20 to £25. The sources highlight the iTank T Sub-Ohm Tank, which falls within this price range.
• Coils: Vaporesso replacement coils are available for £5 to £10. The price may differ depending on the coil type (MTL, DTL, or mesh) and the number of coils included in the pack.

To refill your Vaporesso pod, first remove the pod from the device.

• Snap-style pods: Snap off the mouthpiece to reveal the fill port.
• Pods with rubber flaps: Lift the flap to access the fill port.

Fill the pod with your e-liquid, being careful not to overfill. Securely replace the mouthpiece or plug.

The lifespan of Vaporesso pods depends on usage and coil type.

• Mouth-to-Lung (MTL) Pods: These typically last about a week when used with low-powered devices.
• Direct-to-Lung (DTL) Pods: DTL pods experience more wear and may need replacing more often.

Vaporesso charging times vary depending on the model and battery capacity. Refer to your user manual for specific charging times. Some models, like the XROS 4, can recharge in as little as 30 minutes with 2A fast charging.

• Avoid overfilling the pod or tank beyond the maximum fill line. This helps prevent e-liquid from leaking out of the airflow or mouthpiece.
• Check the O-rings and seals around the pod, tank, and coil to ensure they are in good condition and properly seated. Replace them if needed.
• Inspect the pod or tank for cracks or damage. Replace any cracked components.
• Make sure the coil is securely installed to avoid gaps that could cause e-liquid to escape.
• Regularly clean any condensation that builds up inside the device, especially when vaping at high power settings.

• Check Battery Connection: Ensure the battery is properly connected and making contact.
• Charge the Battery: Fully charge the battery using the recommended charger and cable.
• Use a Different Battery (if applicable): For devices with removable batteries, try using a fully charged alternative battery.
• Pod or Tank Connection: Verify that the pod or tank is correctly inserted and making proper contact with the device.
• Prime the Coil: When installing a new coil, apply a few drops of e-liquid to the cotton wicking ports to prepare it.
• Check Coil Resistance: Ensure the coil’s resistance matches the device's power output range.

Replace the Coil: If the coil is worn, replace it with a new one.

• Check the Coil: A loose or faulty coil may cause buzzing. Tighten or replace the coil to resolve this.
• Clean the Airflow: If e-liquid enters the airflow system, it may cause gurgling or buzzing. Clean the airflow holes with a cotton swab.
• Contact Support: If the noise continues after checking the coil and airflow, reach out to Vaporesso support or your retailer for assistance.

• Follow the user manual for your specific Vaporesso model.
• Regularly inspect and maintain the pod, tank, coil, and seals.
• Use compatible e-liquids and coils for your device.
• Keep the device clean and free from debris or condensation.